Bindler HA-M chocolate moulding line for solid products & shells
US$35,000
(1986), up to 9 moulds/min, with 2 depositors (space for 3 if needed), 5 cooling zones, de-moulder, 3 mould sets included, inclusion feeder & temperer.
| Item no. | 8140 |
|---|---|
| Category | Depositors for Solid Chocolates |
| Year | 1986 |
| Capacity / size | for 275 x 175mm moulds |
| Location | New Zealand |
| Price | US$35,000 |
Machine details
Suitable for producing shell & solid products
Manufactured by BINDLER
Model HA/M
Year 1986
Suitable for mould sizes 275 x 175mms
The Plant has just been used for solid chocolate with/without inclusions, so only the first (shell) depositor is set up currently
There is space on the line for 3 x Depositors, so possibility to do Shell Moulded products as well
There is only one other Depositor available and currently off the plant, but could be re-commissioned
Buyer would need to get a 3rd Depositor, if required
Mould Vibratory sections are also on the line
Plant has 5 cooling zones and fully automatic demoulding station with 2m take-off belt
Usually run at 6 moulds p/min, but can run as fast as 9 per minute
A full set of moulds for the plant is 190 moulds, and there are 240 x 200g, 225 x 100g and 210 x 16g
There are three mould sets remaining for 100g, 200g (bars from Vormenfabriek) and small 16g square piece (from Hans Brunner)
Moulds are all 275 x 175 x 24mms high
There is also an Inclusions Mixer with the Line
The inclusion mixer was made to add chopped nuts, candy and other small pieces, powders and oils to the chocolate before depositing, it comprises -
a. A water jacketed chocolate and ingredient mixing screw with 3 phase motor, gearbox and VSD
b. An ingredient metering screw mount with a 3 phase motor, gearbox and VSD, which feeds into the mixing screw. There are two removable metering screws – one for ingredient pieces and one for Ingredient powders
c. A small peristaltic flavour dosing pump for oil delivery into the mixing screw
d. A warm water 1kW heating system with a header tank, a circulating pump and associated piping for the water jackets
e. A stainless steel frame with 2 fixed and 2 swivel castors with an electrical control box mounted lower down for housing the controls for the two screw drives, the water heater & pump, and the dosing pump
Plus also a SOLLICH FD200 Tempering Machine that can go with this plant
Still all set up on the factory floor, but no longer in production
Located New Zealand,
Manufactured by BINDLER
Model HA/M
Year 1986
Suitable for mould sizes 275 x 175mms
The Plant has just been used for solid chocolate with/without inclusions, so only the first (shell) depositor is set up currently
There is space on the line for 3 x Depositors, so possibility to do Shell Moulded products as well
There is only one other Depositor available and currently off the plant, but could be re-commissioned
Buyer would need to get a 3rd Depositor, if required
Mould Vibratory sections are also on the line
Plant has 5 cooling zones and fully automatic demoulding station with 2m take-off belt
Usually run at 6 moulds p/min, but can run as fast as 9 per minute
A full set of moulds for the plant is 190 moulds, and there are 240 x 200g, 225 x 100g and 210 x 16g
There are three mould sets remaining for 100g, 200g (bars from Vormenfabriek) and small 16g square piece (from Hans Brunner)
Moulds are all 275 x 175 x 24mms high
There is also an Inclusions Mixer with the Line
The inclusion mixer was made to add chopped nuts, candy and other small pieces, powders and oils to the chocolate before depositing, it comprises -
a. A water jacketed chocolate and ingredient mixing screw with 3 phase motor, gearbox and VSD
b. An ingredient metering screw mount with a 3 phase motor, gearbox and VSD, which feeds into the mixing screw. There are two removable metering screws – one for ingredient pieces and one for Ingredient powders
c. A small peristaltic flavour dosing pump for oil delivery into the mixing screw
d. A warm water 1kW heating system with a header tank, a circulating pump and associated piping for the water jackets
e. A stainless steel frame with 2 fixed and 2 swivel castors with an electrical control box mounted lower down for housing the controls for the two screw drives, the water heater & pump, and the dosing pump
Plus also a SOLLICH FD200 Tempering Machine that can go with this plant
Still all set up on the factory floor, but no longer in production
Located New Zealand,
More depositors for solid chocolates
- Eiskonfekt – €16,500 (Item 1227)
- Carle & Montanari Cavemil 275 moulding line – €24,000 (Item 1325)
- Loesch chocolate moulding line – €12,000 (Item 1326)
- Collmann Hydo 24 chocolate depositor & crème depositor 450mm wide – €16,950 (Item 1628)
- Selmi Caricatore Stampi – €12,000 (Item 1748)
- Bindler GK8 chocolate moulding machine – US$198,000 (Item 2064)
- Hoppe 340 Dressomat depositor – €9,900 (Item 2362)
- NID 33” – US$28,000 (Item 2498)
- Complete napolitan chocolate moulding and wrapping line – €149,950 (Item 2747)
- Illig FS32 jelly & chocolate depositing into thermoformed top sealed trays – €54,000 (Item 3109)
- Egan Food Technologies chocolate depositor – US$25,000 (Item 3185)
- Selmi mould loader – €11,000 (Item 3493)