Bindler chocolate moulding line for 100g & 300g bars with inclusions
€285,000
1200 x 200 x 40mm moulds, 14 x 100g bars/mould, 4 x 300g bars/mould, with Rotzinger buffer station.
| Item no. | 7839 |
|---|---|
| Category | Depositors for Solid Chocolates |
| Year | 1995 |
| Capacity / size | 1.875Kg/hr |
| Location | Poland |
| Price | €285,000 |
Machine details
High output chocolate tablet line:
45 tons/day in 3-shift.
The line is still set up, but the factory is closed 2018.
Located Poland.
The line includes a Rotzinger buffer system. This is needed for when running tablets with inclusions.
PLC has no software, but we can supply.
The nut/inclusion feeding attached to the depositor is very high quality.
The line is perfect for 100g & 300g tablets with/without inclusions.
Depositing plates are included.
New deposit tools for other formats can be offered.
Current format of moulds: 14 tablets x 100g in each mould or 4 x 300g bars
Running at a capacity of about 15 tonnes in an 8 hour shift
Year of manufacture: 1995
The mould size is: 1200 x 200 x 40mm
They were making tablets with a maximum of 23% inclusions
They were making milk, dark chocolate and also tablets with inclusions.
The inclusions were delivered by elevators to the hopper of the depositor.
The line is rated at up to 2.3T per hour but the limitation for them was the tempering and they had no need of this output so they used it at 1.5T per hour.
The cooling compressors are not included because the factory had a centralised Glycol system.
Glycol chiller required 150kW.
Power requirements of 130 kW for the line + for any temperers that you install (temperers not included with the line)
The following can be supplied at additional cost of about 500.000 euros & will take about 6 months. The line will be “as new” apart from the cladding.
PLC
HMI
New main drive
PLC for depositor
New servo drives for depositor
Weighing system for nut feeder station new
HMI for depositor/nut feeding
PLC for Rotzinger
HMI for Rotzinger
SEW servo drives and gears for Rotzinger
safety system latest standard
Panel, only revision of power supplies and some switchgear, generally it can be used, if cables are not harmed by mice, in meantime.....
Revision of gears, linear bearings, some claddings.
The weak point of the line is the mould carriers. They are made from plastic and will break
one after another. That was the big problem from the beginning. We offer to replace them by
aluminium units, much more robust. This is an essential part of the revision
With this revision the line is like new, except the cladding. But more solid than machines built today.
And only 30% of the costs of a new one. And available in short time schedule, at least 6 months.
Moulds are not included, I guess.
45 tons/day in 3-shift.
The line is still set up, but the factory is closed 2018.
Located Poland.
The line includes a Rotzinger buffer system. This is needed for when running tablets with inclusions.
PLC has no software, but we can supply.
The nut/inclusion feeding attached to the depositor is very high quality.
The line is perfect for 100g & 300g tablets with/without inclusions.
Depositing plates are included.
New deposit tools for other formats can be offered.
Current format of moulds: 14 tablets x 100g in each mould or 4 x 300g bars
Running at a capacity of about 15 tonnes in an 8 hour shift
Year of manufacture: 1995
The mould size is: 1200 x 200 x 40mm
They were making tablets with a maximum of 23% inclusions
They were making milk, dark chocolate and also tablets with inclusions.
The inclusions were delivered by elevators to the hopper of the depositor.
The line is rated at up to 2.3T per hour but the limitation for them was the tempering and they had no need of this output so they used it at 1.5T per hour.
The cooling compressors are not included because the factory had a centralised Glycol system.
Glycol chiller required 150kW.
Power requirements of 130 kW for the line + for any temperers that you install (temperers not included with the line)
The following can be supplied at additional cost of about 500.000 euros & will take about 6 months. The line will be “as new” apart from the cladding.
PLC
HMI
New main drive
PLC for depositor
New servo drives for depositor
Weighing system for nut feeder station new
HMI for depositor/nut feeding
PLC for Rotzinger
HMI for Rotzinger
SEW servo drives and gears for Rotzinger
safety system latest standard
Panel, only revision of power supplies and some switchgear, generally it can be used, if cables are not harmed by mice, in meantime.....
Revision of gears, linear bearings, some claddings.
The weak point of the line is the mould carriers. They are made from plastic and will break
one after another. That was the big problem from the beginning. We offer to replace them by
aluminium units, much more robust. This is an essential part of the revision
With this revision the line is like new, except the cladding. But more solid than machines built today.
And only 30% of the costs of a new one. And available in short time schedule, at least 6 months.
Moulds are not included, I guess.
More depositors for solid chocolates
- Eiskonfekt – €16,500 (Item 1227)
- Carle & Montanari Cavemil 275 moulding line – €24,000 (Item 1325)
- Loesch chocolate moulding line – €12,000 (Item 1326)
- Collmann Hydo 24 chocolate depositor & crème depositor 450mm wide – €16,950 (Item 1628)
- Selmi Caricatore Stampi – €12,000 (Item 1748)
- Bindler GK8 chocolate moulding machine – US$198,000 (Item 2064)
- Hoppe 340 Dressomat depositor – €9,900 (Item 2362)
- NID 33” – US$28,000 (Item 2498)
- Complete napolitan chocolate moulding and wrapping line – €149,950 (Item 2747)
- Illig FS32 jelly & chocolate depositing into thermoformed top sealed trays – €54,000 (Item 3109)
- Egan Food Technologies chocolate depositor – US$25,000 (Item 3185)
- Selmi mould loader – €11,000 (Item 3493)