NPACK NP-VF glass jar filling line

Manufacturer NPACK
Model NP-VF und NP-LC
Year 2025
Storage number
Performance Approximately 15 pieces/min, depending on fill volume and operating mode
Filling principle volumetric piston filling
Number of filling nozzles 1
Filling accuracy ± 1 g
Hot filling possible
Under-lid steaming unavailable

Description
This NPACK NP-VF / NP-LC system is an automatic filling and capping line for jars and round containers with twist-off closures. It combines volumetric piston filling with a linear capping station, lid feeder, conveyor technology, and a collecting rotary table.
The machine is used to dispense liquid to pasty products into jars in measured amounts and then seal them with twist-off lids. Suitable products include, for example, jams, honey, syrups, sauces, ketchup, mayonnaise, creams, fruit preparations, delicatessen items, and similar food or cosmetic products.
According to the user, the system can be used for hot filling. However, it does not have under-lid vapor deposition or active vacuum generation. For roducts with defined vacuum requirements, the process must be tested separately or technically modified.
The line is suitable for manufacturers, delicatessen companies, honey and jam bottlers, sauce producers, contract bottlers, cosmetic companies and smaller food production facilities that are looking for a compact, functional and low-traffic filling and sealing solution.
Alternative names: Jar filling machine, piston filler, automatic filling machine, single nozzle filler, piston filler, twist-off capping machine, screw capper for jars, spindle capper, capping machine, filling and capping line, jam filling machine, honey filling machine, sauce filling machine.

Machine type: automatic filling and capping system
Operating principle: linear continuous flow system
Filling principle: volumetric piston filling
Number of filling nozzles: 1
Filling range: 100 ml to 1,000 ml
Output: approx. 15 pieces/min, depending on fill volume and operating mode
Designed for cylindrical glasses with capacities of 212, 270 and 385 ml with a diameter of 66 mm.
Filling accuracy: ± 1 g
Operating hours: few operating hours
Hot filling: possible
Closure type: Twist-off closures
Underside of lid: not present
Vacuum production: not available
CIP: not available
Filling module air pressure: 0.6 MPa
Filling module connection: 220 V, 1-phase
Filling module power: 1 kW
Sealing module air pressure: 0.6 MPa
Locking module connection: 220 V, 1-phase
Locking module power: 2 kW
Control panel: Siemens Smart Line HMI
Controller: Siemens SIMATIC S7-200 SMART
Frequency converter: Danfoss VLT Micro Drive
Servo drives: several AC servo units
Pneumatics: AirTAC components
Lid feed: Climbing belt / elevator with blue plastic belt
Transport: linear conveyor belt with adjustable side guides
Collection area: round rotating collection table / discharge table
Material of product-contacting parts as shown in the attached screenshot: Stainless steel 304SS
CE marking: visible on type plates