Schaaf snack & breakfast cereal coating

Description
TYPE 318:: COATING DRUM 1600
For the application of various taste and aroma giving materials by using various aromatising techniques.
The special drum profile offers following main advantages:
- optimal rolling of the product for uniform coating
- minimum possible friction/damage of the product surface
- no hidden corners, easy to clean, bacteriologically optimal surface.

Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW.

Drum diameter: 1600 mm
Blec I Tljwbqx Hoqbcjc
Drum length: 4000 mm
Drum height : 3270 mm

TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE
Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate.
The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates.
Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency.
The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum.
The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses.
The rpm of the drum is adjustable continuously.
The drive is carried out by a three-phase motor 1.5 kW.
Drum diameter: 1600 mm
Electrical heating power: 126 kW
Drum length:4300 mm
Drum height : 2960 mm

TYPE 361:: COOLING DRUM 1600
For cooling of sticky and hot extruded products under rotation for separation.
The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC.
Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed.
Drum diameter :1600 mm
Drum length: 4000 mm
Drum height : 2890 mm