Schaaf flavour coating line for snacks & breakfast cereals
€135,000
With 318 coating drum, 282 drum dryer/roaster 1600 PTFE & 361 cooling drum 1600.
| Item no. | 6970 |
|---|---|
| Category | Miscellaneous Snack Mchines |
| Year | 2018 |
| Location | Sweden |
| Price | €135,000 |
Machine details
FLAVOUR COATING LINE FOR EXTRUDED SNACKFOOD / BREAKFAST CEREAL PRODUCTS
Manufactured by SCHAAF
All from Year 2018.
Line includes :
TYPE 318 COATING DRUM 1600
For the application of various taste and aroma giving materials by using various aromatising techniques.
The special drum profile offers the following main advantages:
- optimal Rolling of the product for uniform coating
- minimum possible friction/damage of the product surface
- no hidden corners, easy to clean, bacteriologically optimal surface.
Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW.
Drum diameter: 1600 mm
Drum length: 4000 mm
Drum height: 3270 mm.
TYPE 282 DRUM DRIER/ROASTER 1600 PTFE,
Serial Number 24150/282.2018
Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate.
The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates.
Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency.
The whole machine is made of rust-free stainless steel. The radiation elements are attached to a common carrying arm in the drum.
The roasting drum runs are special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion-free covering to reduce energy losses.
The rpm of the drum is adjustable continuously.
The drive is carried out by a three-phase motor 1.5 kW.
Drum diameter: 1600 mm
Electrical heating power: 126 kW
Drum length: 4300 mm
Drum height: 2960 mm.
TYPE 361 COOLING DRUM 1600
For cooling of sticky and hot extruded products under rotation for separation.
The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC.
Please note: depending on the product characteristics, additional cooling might be necessary for breakfast cereals before the product can be packed.
Drum diameter: 1600 mm
Drum length: 4000 mm
Drum height: 2890 mm.
The equipment is all still set up on the factory floor, and recently out of production.
The Operating manuals, Electrical drawings, etc. Are all included.
The line has had little use and is in very good condition.
Located in Sweden,
Manufactured by SCHAAF
All from Year 2018.
Line includes :
TYPE 318 COATING DRUM 1600
For the application of various taste and aroma giving materials by using various aromatising techniques.
The special drum profile offers the following main advantages:
- optimal Rolling of the product for uniform coating
- minimum possible friction/damage of the product surface
- no hidden corners, easy to clean, bacteriologically optimal surface.
Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW.
Drum diameter: 1600 mm
Drum length: 4000 mm
Drum height: 3270 mm.
TYPE 282 DRUM DRIER/ROASTER 1600 PTFE,
Serial Number 24150/282.2018
Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate.
The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates.
Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency.
The whole machine is made of rust-free stainless steel. The radiation elements are attached to a common carrying arm in the drum.
The roasting drum runs are special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion-free covering to reduce energy losses.
The rpm of the drum is adjustable continuously.
The drive is carried out by a three-phase motor 1.5 kW.
Drum diameter: 1600 mm
Electrical heating power: 126 kW
Drum length: 4300 mm
Drum height: 2960 mm.
TYPE 361 COOLING DRUM 1600
For cooling of sticky and hot extruded products under rotation for separation.
The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC.
Please note: depending on the product characteristics, additional cooling might be necessary for breakfast cereals before the product can be packed.
Drum diameter: 1600 mm
Drum length: 4000 mm
Drum height: 2890 mm.
The equipment is all still set up on the factory floor, and recently out of production.
The Operating manuals, Electrical drawings, etc. Are all included.
The line has had little use and is in very good condition.
Located in Sweden,
More miscellaneous snack mchines
- GEM 2-stage continuous frying line – US$2,300,000 (Item 4987)
- Cretors FT80C1XA214 seasoning drum – US$15,000 (Item 5881)
- Axis A4874-A100 seasoning drum – US$145,000 (Item 5882)
- Lanly 1800 single pass continuous dryer – Make an offer (Item 6200)
- Seasoning drums with oil spray & dry ingredient feeder – US$18,500 each (Item 6209)
- Stainless steel coating tunnel for snacks – US$5,000 (Item 6639)
- CJB 924-1 impingement cooling conveying 1m x 5.5m – US$22,000 (Item 6798)
- Heat & Control MM-12-36 fryer & ABJ Equipment batter-bread applicators – US$215,000 (Item 7295)
- Inox 2.4m long x 1.2m diameter coating drum for snacks – US$14,500 (Item 7336)
- IZO FA-60-K fully automatic fat fryer – €16,000 (Item 7587)
- Heat & Control DFF-3616 direct fired fryer – US$22,500 (Item 7703)
- Nilma Frymatic 180-800 continuous fryer – €22,500 (Item 8097)