EFS Inc Prodigy FTO-3216 horno de gas de fuego directo
US$25,000
Cinta de alambre de 32” de ancho x 16’, se usa para panes.
| Artículo nº | 6872 |
|---|---|
| Categoría | HORNOS DE TUNEL |
| Año | 2010 |
| Capacidad / tamaño | (800mm x 4,9m) |
| Ubicación | USA |
| Precio | US$25,000 |
Detalles de la máquina
Manufacturer EFS, Inc.
Model FTO-3216
Serial Number 2010-08-FTO-2
Measurements 32" wide X 16' long
Direct fired natural gas single pass oven,
140,0000 BTU per hour,
32" wide X 16' compound weave wire mesh oven conveyor,
includes (5) top and (11) bottom infrared burners,
10" WC (water column)
gas pressure,
480 Volts, 3-phase, 60 Hz, 16 AMPS
with Sumitomo drive at 179:1 ratio, 2 HP, 9.78 RPM output, 5 HP drive motor, 30" wide x 28" long, balanced weave wire mesh transfer conveyor,
1/2 HP drive, control/flame sensor/temp panel with (3) AB Powerflex 3 and 2 HP Ac drives,
LH operator switch control panel,
3 HP blower to burner proportioning system,
insulated hood, doors and cladding/tunnel enclosure,
hood lift drive assembly,
HD frame construction.
Set up for 3-1/2" inlet clearance,
3-1/4" outlet clearance;
Max clearance - 5" inlet & 4-3/4" outlet.
Previously used in flatbread operation.
Model FTO-3216
Serial Number 2010-08-FTO-2
Measurements 32" wide X 16' long
Direct fired natural gas single pass oven,
140,0000 BTU per hour,
32" wide X 16' compound weave wire mesh oven conveyor,
includes (5) top and (11) bottom infrared burners,
10" WC (water column)
gas pressure,
480 Volts, 3-phase, 60 Hz, 16 AMPS
with Sumitomo drive at 179:1 ratio, 2 HP, 9.78 RPM output, 5 HP drive motor, 30" wide x 28" long, balanced weave wire mesh transfer conveyor,
1/2 HP drive, control/flame sensor/temp panel with (3) AB Powerflex 3 and 2 HP Ac drives,
LH operator switch control panel,
3 HP blower to burner proportioning system,
insulated hood, doors and cladding/tunnel enclosure,
hood lift drive assembly,
HD frame construction.
Set up for 3-1/2" inlet clearance,
3-1/4" outlet clearance;
Max clearance - 5" inlet & 4-3/4" outlet.
Previously used in flatbread operation.
Más: HORNOS DE TUNEL
- Werner & Pfleiderer horno a gas de 1200mm x 36m – €89,950 (Artículo 2906)
- WP Haton horno a gas con malla de alambre – US$69,950 (Artículo 3088)
- Van de Pol horno a gas con banda de acero – €93,000 (Artículo 3142)
- Fiamma Lesire FUVR horno a gas – €90,000 (Artículo 4529)
- Meincke Tonsbakken 10-DK-2740 horno a gas – US$54,950 (Artículo 4584)
- APV horno de ancho 600mm x 9m con corta alambre ajustable modelo 8-80 – US$85,000 (Artículo 4906)
- Dong Yang horno de galletas – US$135,000 (Artículo 4940)
- Mantova Forni horno de ancho 2m x 28m largo – €185,000 (Artículo 5188)
- Horno Imaforni de ancho de banda 2m x 20m – €45,000 (Artículo 5715)
- Gou et horno de 2.45 x 22m para tostar pan – €65,000 (Artículo 5770)
- Polin horno túnel de ancho 900mm x 27m largo – €39,950 (Artículo 5942)
- Fiammi horno de 1m x 31m con malla de alambre – €79,950 (Artículo 6292)